Skip to main content

Boat Repair FAQ: Straight Answers from Mercury Certified Technicians

Boat owners ask us the same smart questions every week: how often to service an engine, why it won't start, and whether it's time to repower. Here are honest answers from the service advisors and Mercury Trained and Certified Technicians at Anchors Up Marine Services, a Mercury Authorized Dealer and Mercury Certified Repower Center in Long Beach. Every boat is different, so if your question isn't covered here, call or text us at 310-942-2628 and we'll give you real, honest and professional advice.


Maintenance and Service Intervals

How often should I service my outboard engine?

For most Mercury FourStroke outboards, Mercury calls for scheduled maintenance every 100 engine hours or once a year, whichever comes first, and before any long storage. High-hour boaters should follow the hour-based schedule in their owner's manual. In Southern California, many boats run year-round and sit in saltwater between trips, so the "once a year" mark often arrives before 100 hours does. Your exact schedule depends on your engine's model and serial number. As a Mercury Authorized Dealer, we service to Mercury's factory schedule using genuine parts, and we keep a record of every visit. Book your annual service online or see our full repair services.

What is included in a 100-hour or annual service?

On a typical Mercury FourStroke outboard, the annual or 100-hour service includes changing the engine oil and filter, draining and refilling the gearcase lube, inspecting the fuel filter and replacing it as needed, and removing the propeller to inspect and grease the shaft. We also inspect anodes, the thermostat, battery, steering, controls, hoses and the bolts that hold the engine to the transom. On saltwater engines we pull and inspect the spark plugs for corrosion. Sterndrives add items such as bellows and gimbal bearing checks. The exact list varies by model, so our Mercury Certified Technicians follow your engine's factory schedule and give you a clear written estimate before we start. Schedule service.

How often should the water pump impeller be replaced?

On many Mercury outboards, the owner's manual lists water pump impeller replacement every 300 hours or three years, whichever comes first. Mercury also says to replace it sooner if the engine overheats or water pressure drops. The impeller is a rubber part that wears and can crack or take a "set" with age, even on an engine that doesn't run much. A failed impeller is one of the most common causes of overheating, and overheating can cause expensive engine damage. Intervals differ by model, so we check your engine's specific schedule. Replacing an impeller means removing the lower unit, and Mercury lists it as a dealer service item, so it's a job for our certified technicians.

Do I really need to flush my engine after every saltwater trip?

Yes. Mercury recommends flushing and rinsing any outboard or sterndrive after each use in saltwater. Flushing pushes corrosive salt out of the cooling passages, and rinsing removes salt from the outside before corrosion starts. Most late-model Mercury outboards from 70 to 400 hp have a Flush Connect fitting for a garden hose. Older engines use flush muffs. Lower the outboard to vertical before rinsing the cowl so water doesn't get into the air intake, and avoid high-pressure spray near electrical parts. Long Beach and South Bay boats live in saltwater, and we see what skipped flushes do to cooling passages. Ask us to show you the right flushing method for your engine at your next service visit.

How often should I replace my engine's anodes?

Mercury's guidance is to replace sacrificial anodes once they've worn away about 50 percent, and to check them often when you boat in saltwater. Anodes are made to corrode so that your gearcase, drive and other metal parts don't. Once an anode is used up, corrosion goes after the engine instead. Boats kept in a slip can wear through anodes faster, especially near docks with stray electrical current. Never paint over anodes, and always match the anode material to your water type. We inspect anodes at every service, stock genuine Mercury and Quicksilver anodes in our parts department, and can replace them at your slip with our mobile service.

Do boats in Southern California need to be winterized?

We rarely see freezing temperatures here, so traditional cold-weather winterizing usually isn't needed. Storage prep still matters, though, any time your boat will sit for more than a few weeks. Mercury recommends treating fresh, preferably ethanol-free fuel with a marine stabilizer such as Quickstor, then running the engine for 5 to 10 minutes so the treated fuel reaches the whole system. Flush the engine, charge or disconnect the battery, and have the annual service done before the boat sits. Our technicians can handle complete storage prep in the yard or at your slip. Book online or call 310-942-2628 before your boat goes into its off season.

What fuel should I use, and is ethanol bad for my boat engine?

Mercury says all current Mercury gasoline engines are designed to run on fuel with up to 10 percent ethanol (E10). Avoid E15 and E85, because their higher ethanol content can damage fuel system parts. When possible, Mercury recommends ethanol-free gas. Ethanol absorbs moisture, and over time that can lead to phase separation, which means water and ethanol settle at the bottom of the tank where the engine picks up fuel. Use the octane rating in your owner's manual, buy from busy fuel docks or stations, and treat fuel that will sit. If your engine runs rough after sitting, bad fuel is a common cause. Our technicians can diagnose and clean fuel systems.

Troubleshooting Engine Problems

Why won't my outboard start?

Start with the simple things. Make sure the safety lanyard is attached, the shifter is in neutral, the battery switch is on and the fuel tank vent is open. Squeeze the primer bulb until it's firm, and check the fuel line for kinks. Clean and tighten the battery terminals, because salt air corrodes them quickly. If the engine cranks but won't fire, or you only hear clicking, the cause could be a weak battery, a blown fuse, a clogged fuel filter, bad fuel, fouled spark plugs or a failing starter. Modern Mercury engines store fault codes, and our dealer diagnostic tools can read them, so we find the real cause instead of guessing. Call 310-942-2628 or request mobile service at your slip

Why is my engine overheating, or why is the telltale stream weak?

Shut the engine off right away if the overheat alarm sounds. Running a hot engine can cause serious damage. A weak or missing telltale stream (the small stream of water from the side of the engine) can be as simple as a clogged telltale outlet, or a water intake blocked by kelp, a plastic bag or sand. If clearing those doesn't help, the usual suspects are a worn water pump impeller, a stuck thermostat or salt and scale building up in the cooling passages, which is common on saltwater engines that aren't flushed. Don't keep running it and hope. Our Mercury Certified Technicians can inspect the cooling system and give you a written estimate before any work begins. Call 310-942-2628.

What are the warning signs that my boat engine needs repair?

Watch for hard starting, rough idle, stalling, loss of top-end speed, new vibration, overheating alarms, a weak telltale stream, smoke, fuel smells or a check-engine warning on your gauges. Also look for milky or metallic engine or gear oil, water in the bilge and corrosion around the powerhead. Small problems on a boat tend to get bigger, and in saltwater they get bigger faster. Catching them early is almost always cheaper than a breakdown on the water and a tow back in. If something feels or sounds different, have it checked. Book an appointment and you'll get our free 50-point inspection, or call or text a service advisor at 310-942-2628.

Why does my engine lose power or bog down when I accelerate?

Loss of power usually comes from the fuel system, ignition or propeller. Common causes include a clogged fuel filter or water-separating filter, stale or water-contaminated fuel, a pinched fuel line, fouled spark plugs and a damaged prop or a spun prop hub. Outdrives and outboards can also lose power from a fouled bottom or the wrong prop pitch for the load you carry. Electronic Mercury engines may also limit power on purpose to protect themselves when they detect a problem, which is called "guardian mode". That's a signal to get it checked, not to push through. Our technicians use Mercury diagnostic tools to find the cause and give you a clear written estimate. See our repair services.

Why does my boat battery keep dying?

A battery that keeps going dead usually has one of four causes: an old battery that no longer holds a charge, a charging system that isn't putting power back, a parasitic draw from something left on (bilge pumps, electronics, stereos), or corroded connections and grounds. Saltwater air is hard on terminals and wiring, so corrosion is a frequent culprit on Southern California boats. Dual-battery setups can also drain both batteries if the switch is left in the wrong position. We test the battery and charging system and trace electrical draws so you're not just buying batteries over and over. Our electrical and electronics service can also handle wiring, chargers and chartplotters, in the yard or at your slip.

Repowering Your Boat

Should I repair my old engine or repower?

It depends on the engine's overall health, not just one repair bill. A well-maintained engine with good, even compression and a single problem is often worth fixing. Repowering starts to make more sense when the powerhead needs replacement, compression is low or uneven, corrosion is spreading, parts are hard to find, or repairs keep piling up. Many industry guides use a rule of thumb: if one repair would cost close to half the price of a comparable new engine, compare it to a repower. As a Mercury Certified Repower Center, we can give you both options in a clear written estimate, so you're comparing real numbers. Learn more about repowers and engine repair.

How much does it cost to repower a boat?

There's no honest one-size answer. The price depends on the horsepower, single or twin engines, whether you're replacing an outboard or a sterndrive, and how much rigging needs to change, such as controls, gauges, steering, wiring and props. Some boats also need transom or structural work before new power goes on. Adding a new engine to an older boat is often a smart value compared with buying a new boat, but the details matter. We provide a free, written repower quote that lists the engine, rigging and labor, so there are no surprises. Mercury financing is also available to qualified buyers. Visit our repower page or call 310-942-2628 to schedule a one-on-one meeting with a repower specialist.

How long does a repower take?

Discover Boating notes that a repower can take anywhere from several days to several weeks, depending on the boat's size and the complexity of the job. A simple outboard-for-outboard swap goes much faster than a twin-engine job or a conversion that needs new controls, wiring or transom work. Engine availability also plays a role. We give you a realistic schedule in your written quote, and keep you updated along the way. Planning a repower during your slower boating months is a smart way to avoid missing prime-time weekends. Get started on our repower page.

What warranty comes with a new Mercury engine?

New Mercury engines come with a factory limited warranty. Mercury's published U.S. warranty chart lists 3 years of limited coverage for new recreational outboards, and coverage terms vary by model and by recreational versus commercial use. Mercury also offers Mercury Product Protection, an optional extended service plan. Because Anchors Up is a Mercury Certified Repower Center, we're authorized to sell, install and warrant Mercury engines, and we register your engine and handle warranty work. Ask us for the current terms on the specific engine you're considering, since Mercury sets and updates them. See our repower page for details.

Can I finance a repower?

Yes. Mercury offers financing to qualified buyers, and you can finance the entire repower solution, including the engine, rigging parts and labor, which can turn a big project into a manageable monthly payment. Rates and terms depend on Mercury's current programs and your credit approval, so we'll walk you through the options that apply when you request a quote. Many owners find that financing a repower on a boat they already know and trust makes more sense than taking on a loan for a new boat. Call 310-942-2628 or visit our repower page to get a free quote.

Repair Costs, Timing and Choosing a Shop

How much does boat repair cost?

Honestly, it depends on the problem, the engine and the parts it needs. A loose battery connection and a damaged powerhead are both "it won't run," but they're very different jobs. That's why we diagnose first and give you a clear written estimate before any work begins. If we find something else along the way, we call you and get your approval before doing more. Our regular season labor rates are $175/hr. in yard and $200/hr. remote, while special discounts apply in off season months. Members of our membership program save on parts and service. The best way to keep repair costs down is regular maintenance, because preventing a problem almost always costs less than fixing one. Book an appointment.

How long will my boat repair take?

It depends on the job, parts availability and the time of year. Routine maintenance and many common repairs can often be done quickly, especially at your slip with our mobile service, while engine rebuilds, restorations and repowers take longer. Because we're a Mercury Authorized Dealer and keep genuine Mercury and Quicksilver parts in stock, we often avoid the waits that come with ordering parts. When you book, a service advisor follows up within 24 hours to confirm details, and your written estimate includes an expected timeline. Members of our membership program also get priority appointment scheduling. Busy spring and summer months fill up, so book early at using our Appointments page.

Will having my boat serviced at an independent shop void my Mercury warranty?

Under U.S. federal law (the Magnuson-Moss Warranty Act and FTC rules), a manufacturer generally can't void your warranty just because routine maintenance was done by someone other than a dealer. It can deny a claim if improper work or parts caused the failure. Warranty repairs themselves, though, must be performed by an authorized Mercury repair facility. As a Mercury Authorized Dealer, Anchors Up can handle both your routine maintenance and your warranty repairs, using genuine parts and Mercury's factory procedures. We also keep detailed service records, which help if you ever need to file a claim or sell the boat. Keep your receipts no matter where you get service. Schedule service.

Should I use mobile service at my slip or bring my boat to your yard?

Many jobs never need to leave the water. Our mobile technicians handle routine maintenance, electrical work, diagnostics and many repairs at marinas in Long Beach, San Pedro, Wilmington, Redondo Beach, Newport Beach and Marina del Rey. Bigger jobs, such as repowers, restorations, major engine work and anything below the waterline, are better done in our Long Beach yard, where we have the room and equipment. For smaller boats under 12,000 lbs. and 35ft in length, we provide the trailer and logistics directly to you. For larger boats, logistics vendors such as A&D Logistics may be recommended and larger boats are often supported at our partner yard, Sunset Aquatics in Huntington Beach. Not sure which you need? Tell us what's going on when you book online, and a service advisor will recommend the right option.

Should I use OEM or aftermarket parts on my boat?

For engine and drive components, we recommend genuine Mercury and Quicksilver parts. They're built to Mercury's specifications for your engine, which matters for fit, performance and corrosion resistance in saltwater. Some aftermarket parts work fine, but quality varies, and the wrong part on a cooling, fuel or ignition system can cost you far more than it saved. As a Mercury Authorized Dealer, we keep genuine parts in stock and can look up the correct part for your engine's serial number. Members of our membership program get discounts on parts, and our team can help you find what you need on our boat parts page.

Fiberglass, Haul-Outs and Restoration

Can gelcoat cracks and dock rash be repaired?

Yes, and a good repair can be close to invisible. Surface spider cracks, scratches and dock rash can usually be ground out, filled with color-matched gelcoat, then sanded and polished. Cracks that keep coming back, though, often point to flex or stress in the laminate underneath, so the real fix may involve more than cosmetics. Soft spots, deep gouges, blisters below the waterline or damage near hardware should be inspected before anyone fills them. Our fiberglass and gelcoat team inspects the damage, explains what's cosmetic and what's structural, and gives you a written estimate. See our restoration services or book an inspection.

How often should my boat be hauled out?

There's no single interval. It depends on your bottom paint, how fast growth builds up in your harbor, how much you use the boat and what needs attention below the waterline. A haul-out lets you inspect and repaint the bottom, replace through-hull and running gear anodes, check props, shafts, seals and through-hulls, and repair blisters or damage you can't see from the dock. If you notice a drop in speed or fuel economy, vibration, or a leak, don't wait. We offer both emergency and preventative maintenance haul-outs, in our Long Beach yard and through our partner yard, Sunset Aquatic Shipyard in Huntington Beach. The best recommendation is to schedule a haul out once annually for preventative maintenance and inspections. Call 310-942-2628 to schedule.

Is it worth restoring an older boat?

Often, yes, when the hull and structure are solid. Many older boats were built well, and restoring one you already own can cost less than buying new, especially when the restoration is paired with a new Mercury repower. The key is an honest inspection first. A boat with a sound hull and tired systems is a great candidate. A boat with widespread rot, a soft transom or major structural damage may need more work than it's worth. We'll walk you through what we find, restore the boat system by system, and give you a clear written estimate so you can decide with real numbers. We can also discuss the tax advantages and long term savings that might apply to restoration compared to purchasing a new boat. Explore our restoration services and repower options.

Our service advisors are happy to help. Call or text a Service Advisor at 310-942-2628, or book online and we'll follow up to confirm your appointment.

Still Have a Question?

Our service advisors are happy to help. Call or text a Service Advisor at 310-942-2628, or book online and we'll follow up to confirm your appointment. You may also visit us at 1919 W Wardlow Rd, Long Beach, CA 90810.